Leading Innovations in
Accessories

Moldings & Trims
for your stylish TORLYS Smart Floors

INCIZO 5-IN-1 Molding

5 molding solutions in one for maximum efficiency and flexibility.
Nominal 84-1/2” (length) x 1-7/8” (width), (2150mm x 48mm).

Improved to include flush mount stair nosing.

1. T-Moulding Adjoin two floors of identical height.
2. Reducer Transition two different floor heights.
3. Square Nose Transition to carpet.
4. Square Nose Conceal the expansion gap around the perimeter of the room.
5. Flush Stair Nosing Stair-edge seamless trim moulding for installation of TORLYS laminate on staircases. Clicks flush into your TORLYS laminate floor, eliminating the overlap of traditional stair nosing. INCIZO can also be used for non-flush installations on landings.

An Aluminum Sub-Base is required for the Flush Stair Nosing installations.

APPLICATION: TORLYS Smart Floors Laminates

TORLYS Laminate Multi Purpose Moulding

5 moulding solutions in one for an easy solution for the perfect finishing of your floor.
Nominal 84-1/2” (length) x 1-7/8” (width), (2150mm x 48mm).

You can use the moulding in many ways.

1. T-Moulding Adjoin two floors of identical height.
2. Reducer Transition two different floor heights.
3. Square Nose Transition to fitted carpet.
4. Square Nose Finish the edge of a floor against a vertical surface such as sliding doors, tile floor, etc.
5. Flush Stair Nosing Flush installation of stair treads on enclosed or open-ended stairs.
6. Overlap Stair Nose Installation of stair nose where floating floor expansion and contraction is required.

An Aluminum Sub-Base is required for the Flush Stair Nosing installations.

APPLICATION: Select TORLYS Smart Floors Laminates (Avenue, Rivera, Lexington-W and Grand).

Click here for Installation Instructions.

SoloPlus 5-in-1 Molding

5 molding solutions in one for maximum efficiency and flexibility.

1. Square Nose Transition to carpet.
2. Square Nose Conceal the expansion gap around the perimeter of the room
3. Reducer Transition two different floor heights
4. Flush Stair Nosing Stair-edge seamless trim moulding for installation of TORLYS Cork on staircases. Clicks flush into your TORLYS Cork floor, eliminating the overlap of traditional stair nosing. SoloPlus can also be used for non-flush installations on landings
5. T-Molding Adjoin two floors of identical height

An Aluminum Sub-Base is required for the Flush Stair Nosing installations.

APPLICATION: All TORLYS Smart Floors products with exception of TORLYS Laminate

Click here for installation instructions.

smartSTEP

The world’s first state-of-the-art floating flush stair nosing that can be installed in floating or nail/glue down applications.

TORLYS offers the only stair nosing in the world that can be installed in a floating application, the smartSTEP molding solution. These stair treads are manufactured using a full flooring plank with a carefully crafted texture and a color-matched stair nose for a perfect match.

For quick, easy, and seamless installation, all TORLYS Smart Floor smartSTEP stair nosings use the patented Uniclic^® joint.

Every TORLYS smartSTEP is a standard 46” length and the width is the width of the plank + approximately 5/32”.

APPLICATION: All TORLYS Smart Floors products except for TORLYS EverWood, TORLYS EverTile, TORLYS RigidWood, and TORLYS Cork.

TORLYS EverWood Flush Stair Nosing and Flush Reducer

These moldings were specially designed to work with TORLYS EverWood, being made from the exact same top layer as the floors. They are installed flush with the flooring, resulting in no need for overlapping. In the case of Flush Stair Nosing, flooring is clicked into place for a flawless look without transition bumps.

APPLICATION: TORLYS EverWood and TORLYS EverTile

Thin Strip
Transition Molding

ThinStrip is a low profile transition molding, with only a 1mm edge (compared to a 3-4mm edge). The molding’s color is matched to your floor and has a polyurethane coating for added wear resistance. It can be used in place of a traditional T-mold transition, is bendable for height variations between floors, and uses a self-adhesive strip for easy installation.

APPLICATION: TORLYS EverWood & TORLYS EverTile

TORLYS RigidWood^™ Flush European Stair Nosing

This contemporary square stair nosing for TORLYS Smart Floors RigidWood^™ perfectly complement the modern floorcovering. It is installed flush with the flooring, resulting in no need for overlap.

APPLICATION: TORLYS RigidWood

Overlap Reducer

Colour coordinated moulding to allow for a smooth transition between floors of different heights.

APPLICATION: TORLYS RigidWood

T-Molding

An attractive solution for transitioning between floor surfaces in adjoining rooms where floors are approximately the same thickness.

APPLICATION: TORLYS RigidWood

TORLYS SmartTape

Thanks to the Uniclic^® joint and TORLYS SmartTape technologies, TORLYS floors can be installed more easily than other floating floors.

With other floating floors, installation against a brick wall, fireplace hearth or a curved surface like a staircase can cause issues due to shifting. With TORLYS Smart Floors, the first rows can be anchored in place to stop any movement, making installation easy.

APPLICATION: All TORLYS Smart Floors

TORLYS SmartGlue

For a more traditional installation, choose TORLYS Smart Glue to install all TORLYS Smart Floors with the exception of laminates.

APPLICATION: TORLYS EverWood

Direct Ship Moldings for TORLYS Smart Hardwood

TORLYS Direct Ship accessories include color coordinated moldings, stair nosings and vents that provide the final design element for any room, creating a seamless appearance with any TORLYS hardwood floor.

Suitable for floating and nail/glue down applications.*

1. Quarter Round Create subtle blends between a wall base/vertical surface and hardwood floors.
2. T-Molding Provide an attractive solution for transitioning between floor surfaces with approximately the same thickness in adjoining rooms.
3. Wall Base Create a formal border transition between flooring and walls.
4. Reducers Flush, overlapping reducers allow for smooth transitions between floors with different heights.
5. Stair Nose Flush, overlapping stair nosings add a professional and finished look to stairways. Offered in traditional and euro nose profiles.
6. Vents Offered in surface mount and flush styles to provide a consistent and refined appearance to a wood floor.

*See applicable installation instructions.

APPLICATION: All TORLYS Smart Floors Hardwood

Colour coordinating mouldings to finish your project.

1. Stair Nose: Stair nosings add a professional and finished look to stairways.
2. Reducer: Allow for smooth transitions between floors with different heights.
3. T-Moulding: Adjoin two floors of identical height. An attractive solution for transitioning between floor surfaces in adjoining rooms where floors are approximately the same thickness.

APPLICATION: Marquee Floors Laminate Shore, Marquee Floors Laminate Highland, Marquee Floors Laminate Highland Narrow, Marquee Floors Loose Lay Vinyl Olympic